VI-261-CV

Product Summary

to 50W/Cubic Inch s UL, CSA, TüV, VDE, BABT, AUSTEL to 90% Efficiency s Size: 12,7) s Remote Sense and Current Limit s OVP, Thermal Shutdown s Logic Disable s Wide Range Output Adjust s Compatible Power Booster Modules s ZCS Power Architecture s Low Noise FM Control s CE Marked Nominal                                                                                            Up to 50W/Cubic Inch
 UL, CSA, TüV, VDE, BABT,
AUSTEL
 Up to 90% Efficiency
 Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7)
 Remote Sense and Current Limit
 OVP, Thermal Shutdown
 Logic Disable
 Wide Range Output Adjust
 Compatible Power Booster Modules
 ZCS Power Architecture
 Low Noise FM Control
 CE Marked

Parametrics

The VI-200 Family, with over 8 million shipped, is Vicor''s first generation of "zero-current-switching" component-level DC-DC converters. Operating at frequencies to 2 MHz, VI-200 Family Converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. Power Boosters provide a simple, cost effective, off-the-shelf solution for higher power output requirements. One or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power. The flexibility of Vicor''s power components is also available in half-size, half-power VI-J00 MiniMods. (pg. 72)

Overtemperature shutdown 95°C typical (recycle power to restart).
For additional output power use "Boosters". Change (VI-2xx-xx) to (VI-Bxx-xx).
* Brownout 75% of rated load; transient voltage for 1 second.
.080 (2,0) Dia (2) places Solder plate over copper alloy

SlimModsTM, high power density, flangeless packages and FinModsTM, featuring integral finned heatsinks. SlimMod: Option suffix: - S Example: - S FinMod: Option suffix: - F1 and - F2 Examples: -F1, 0.75" height -F2, 1.00" height

Function +In Gate In Gate Out -In +Out +Sense Trim -Sense -Out
.040 (1,0) Dia (7) places Solder plate over copper alloy
(typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified)
s Input Characteristics Inrush charge Input reflected ripple current ­ pp Input ripple rejection
VI-200 C-, I-, M-Grade MIN. TYP. MAX. UNITS TEST CONDITIONS
Nominal line Nominal line, full load 120 Hz, nominal line 2400 Hz, nominal line

No load power dissipation s Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple - pp: 5V 10-48V Trim range1 Total remote sense compensation OVP set point Current limit Short circuit current 3 s Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Power sharing accuracy s Dielectric Withstand Characteristics Input to output Output to baseplate Input to baseplate s Thermal Characteristics Efficiency Baseplate to sink Thermal shutdown4 (Drivers only) s Mechanical Specifications Weight

LL to HL, 10% to Full Load LL to HL, No Load to 10% Over rated temp.

20 MHz bandwidth 20 MHz bandwidth 20 MHz bandwidth 0.25V max. neg. leg Recycle power Automatic restart

Features

DC-DC Converters 50 to 200 Watts

Diagrams